[3 Pack] Screen Protector Tempered Glass for Nintendo Switch, iVoler Transparent HD Clear Anti-Scratch Screen Protector Compatible Nintendo Switch

I’m the kind of person who ends up with bubbles every time she tries to put this kind of protectors on devices. The Switch was starting to get scratched by putting it in and out of the dock and I was starting to use it outdoors much more, and when traveling, so really needed to get something on the screen because it gets scratched in the middle and I regret not having a screen protector. This protector is superb. Very easy to install by following the clear instructions. At first I thought it would be challenging but just follow the steps religiously and you’ll be golden. I had a bubble the size of a water bottle cap despite following the instructions but I kept doing what it said: push with the finger the bubble to the sides. It was slow, so you have to be patient, but as the adhesive product works it magic the process helps to reduce the bubble’s size. In the end my Switch now has a super solid protector that’s the right size and bubble free! It took me maybe 5-10min to do. The package comes with everything you need: wet and dry wipe (very tiny but it’s enough for a Switch!), sticker to pick up dust if any on the screen, stickers to keep the screen into position once you’ve determined the right alignment. I’m always doubtful about self installation for screen protectors but came to say, go with it, this works and is worth it. Oh last thing: the size is perfect. Drives me nuts when a screen protector is off and leaves space on the sides of the screen. This one leaves just a tiny tiny line of space, and has everything aligning perfectly.Read more

I picked this product based on the number of positive reviews (1k+) and it did not disappoint. I love getting 3 screen protectors, as it’s comforting to know that if you get a hair or dust pulled in by the static created by pulling the adhesive off, you can just toss that one aside and try again. I installed it perfectly on the first try and the screen is clear and bubble/dust free. Here are my installation tips (disclaimer: this worked really well for me, but no guarantee it will be perfect for everyone): 1. Turn the shower on hot and close the bathroom door for 5 minutes (not a joke – I used this tip I borrowed from someone else because the steam and vaporized water clings to free floating dust and gets it out of the air). If you’re being environmentally friendly, plan ahead and do the screen protector after an actual shower. 2. Re-enter steamy bathroom, turn off the shower, and give the bathroom a minute to de-fog. 3. Bring in the switch (no joycons attached) and clean the screen well with provided wipes – the dry one is most important to get rid of oil/greasy residue. 4. Peel off the adhesive backing, carefully only holding the edges with clean, dry hands. 5. Align one corner and short edge (left or right – I started on the left side since I’m right handed), carefully keeping the margins (distance from the edge of the screen) small and parallel. 6. Start lowering the screen protector down, focusing on keeping the top edge parallel with the screen edge. If it’s slightly off, this is the best time to gently pull back up slightly, pivot to align the top edge more closely to parallel, and then slowly lower the screen protector on top of the screen. 7. When done slowly, the screen protector should naturally squeeze out the air as it adheres to the surface of the screen. Some air might exist on the edges, but gently milking the glass with your thumb from the center of the screen to the outside will squeeze out the remaining air pockets.Read more

Applying any screen protector is a meticulous process if you want to do it right. This protector is no different. My only complaint about it is the lack of guides when applying the protector. You have to use the edges and the slots for the speakers as the only guides. The first protector I tried to put on was slightly crooked and had one fuzzy under it, so I pulled the protector back and it cracked down the middle. The second one went on cleanly, but one side of the protector is right up to the very edge of where the glass of the screen meets the plastic. I would’ve tried to move it slightly, but didn’t want to crack the second cover. Again, it’s very hard to ensure the right placement. In the end the cover looks great, is a great deal ($5.99 for three!), and I feel much better knowing my Switch screen is protected!Read more

Firstly i want to say, delivery arrived and 2/3 screen were broken. bad you’d say right. NOPE I contacted the seller, and boom, issued a new product free of charge. WHAT SERVICE!No queries! honestly, if i had multiple switches, id buy more from this company. the product itself sits cleanly on the screen of the switch. easy instructions to fit also and get a perfect alignment!it fits slightly more snug inside the docking station, but still fits well and doesnt move once fitted!Read more

Please please do not use the “dust absorber ” it leaves adhesive every where! The wipes are terrible as well. Use lens cleaner and a soft cloth. The guide stickers do help but I have seen a review which said that it actually removed some of the paint from the body of the switchRead more

The glass sheets themselves are well cut but fitting them is a nightmare. Don’t use the dust absorbers, the ones I have are far too sticky and left marks on the screen I had to scrub away at to get off. The tool to help push out any bubbles is far too narrow too, should be much wider. Fitted many of these on phones over the years but not impressed with these ones. Overall it done the job eventually.Read more

I am really surprised with how well cut the glass is, and just how precise the cuts are around the edge which covers the screen perfectly to the edge. There’s no rainbow effect from the adhesive either. for $9 I think this is money well spent and while I am sure this glass isn’t on par with the durability of something like gorilla glass, 3 screen protectors for the price of $9 is a great deal in my book. 10/10 would buy againRead more

I had purchased a large ivoler Switch travel bag because I wanted something to carry my Switch that wasn’t going to cost an arm and a leg. I was happy with that case and in need of a screen protector as mine was returned from a repair with Nintendo without one. I’d heard rumors of the initial docks scratching screens and since I had a day one Switch I’m not taking chances. I’m spoiled by the tempered glass screen protectors on my iPhone that gives the natural feeling of the real phone screen and wanted the same for my Switch. I’m very very happy to report that ivoler has achieved the same with these protectors. You can get tempered glass protectors in the same price range anywhere, but I like to find a brand I trust and stick with it. They earned my trust with the first case and have continued to earn it with these!Read more

I put this screen protector on my Switch the day I got it (the Switch), and thought it was good. The wipes left a few specks of moisture on the screen, but the instructions indicate that should work itself out with time and use. Well, they became a big bubble instead. I ignored it for a while, but today I decided to replace the screen protector, and found the solvent in the wipes had EATEN AWAY the glass of my screen! It’s permanently damaged! So much for a screen protector, I’m so mad.Read more

I refuse to purchase Screen Protectors from anywhere else. My first day release switch has been dropped and knocked about a lot over the past 4 years and it’s screen protector is still going strong. I have ivoler screen protectors on all 4 of my own switchs, plus 2 that my husband owns and the 7 owned by the grandchildren. Today I’ve installed one on my new Monster Hunter switch and replaced two. One protector I broke when I knocked my switch off the garden table onto concrete the other had a small chip in the corner which technically didn’t need replacing but aesthetically it was annoying me. After installing 15 screen protectors over 4 years, and only breaking one, I know they not only easy to install, they go on perfectly first every time, and they are strong enough to stand up to almost everything except a face plant onto concrete.Read more

These screen protectors are fool-proof…I’ve never put one on before and managed to get all three on each switch with absolutely no issues at all. Super impressed with the instructions and the packaging they arrived in was great. I seen a few reviews saying not to use the dust absorbers so I didn’t bother with them (didn’t need to anyway) the wipes work great and the screen pretty much just seals itself down without the need to do much, all I did was use the smoother to make sure the edges were down and it was done. Going to buy another pack as need another one and hopefully won’t need to use the spares anytime soon.Read more

I’m the kind of person who ends up with bubbles every time she tries to put this kind of protectors on devices. The Switch was starting to get scratched by putting it in and out of the dock and I was starting to use it outdoors much more, and when traveling, so really needed to get something on the screen because it gets scratched in the middle and I regret not having a screen protector. This protector is superb. Very easy to install by following the clear instructions. At first I thought it would be challenging but just follow the steps religiously and you’ll be golden. I had a bubble the size of a water bottle cap despite following the instructions but I kept doing what it said: push with the finger the bubble to the sides. It was slow, so you have to be patient, but as the adhesive product works it magic the process helps to reduce the bubble’s size. In the end my Switch now has a super solid protector that’s the right size and bubble free! It took me maybe 5-10min to do. The package comes with everything you need: wet and dry wipe (very tiny but it’s enough for a Switch!), sticker to pick up dust if any on the screen, stickers to keep the screen into position once you’ve determined the right alignment. I’m always doubtful about self installation for screen protectors but came to say, go with it, this works and is worth it. Oh last thing: the size is perfect. Drives me nuts when a screen protector is off and leaves space on the sides of the screen. This one leaves just a tiny tiny line of space, and has everything aligning perfectly.Read more

I picked this product based on the number of positive reviews (1k+) and it did not disappoint. I love getting 3 screen protectors, as it’s comforting to know that if you get a hair or dust pulled in by the static created by pulling the adhesive off, you can just toss that one aside and try again. I installed it perfectly on the first try and the screen is clear and bubble/dust free. Here are my installation tips (disclaimer: this worked really well for me, but no guarantee it will be perfect for everyone): 1. Turn the shower on hot and close the bathroom door for 5 minutes (not a joke – I used this tip I borrowed from someone else because the steam and vaporized water clings to free floating dust and gets it out of the air). If you’re being environmentally friendly, plan ahead and do the screen protector after an actual shower. 2. Re-enter steamy bathroom, turn off the shower, and give the bathroom a minute to de-fog. 3. Bring in the switch (no joycons attached) and clean the screen well with provided wipes – the dry one is most important to get rid of oil/greasy residue. 4. Peel off the adhesive backing, carefully only holding the edges with clean, dry hands. 5. Align one corner and short edge (left or right – I started on the left side since I’m right handed), carefully keeping the margins (distance from the edge of the screen) small and parallel. 6. Start lowering the screen protector down, focusing on keeping the top edge parallel with the screen edge. If it’s slightly off, this is the best time to gently pull back up slightly, pivot to align the top edge more closely to parallel, and then slowly lower the screen protector on top of the screen. 7. When done slowly, the screen protector should naturally squeeze out the air as it adheres to the surface of the screen. Some air might exist on the edges, but gently milking the glass with your thumb from the center of the screen to the outside will squeeze out the remaining air pockets.Read more

Applying any screen protector is a meticulous process if you want to do it right. This protector is no different. My only complaint about it is the lack of guides when applying the protector. You have to use the edges and the slots for the speakers as the only guides. The first protector I tried to put on was slightly crooked and had one fuzzy under it, so I pulled the protector back and it cracked down the middle. The second one went on cleanly, but one side of the protector is right up to the very edge of where the glass of the screen meets the plastic. I would’ve tried to move it slightly, but didn’t want to crack the second cover. Again, it’s very hard to ensure the right placement. In the end the cover looks great, is a great deal ($5.99 for three!), and I feel much better knowing my Switch screen is protected!Read more

Firstly i want to say, delivery arrived and 2/3 screen were broken. bad you’d say right. NOPE I contacted the seller, and boom, issued a new product free of charge. WHAT SERVICE!No queries! honestly, if i had multiple switches, id buy more from this company. the product itself sits cleanly on the screen of the switch. easy instructions to fit also and get a perfect alignment!it fits slightly more snug inside the docking station, but still fits well and doesnt move once fitted!Read more

Please please do not use the “dust absorber ” it leaves adhesive every where! The wipes are terrible as well. Use lens cleaner and a soft cloth. The guide stickers do help but I have seen a review which said that it actually removed some of the paint from the body of the switchRead more

The glass sheets themselves are well cut but fitting them is a nightmare. Don’t use the dust absorbers, the ones I have are far too sticky and left marks on the screen I had to scrub away at to get off. The tool to help push out any bubbles is far too narrow too, should be much wider. Fitted many of these on phones over the years but not impressed with these ones. Overall it done the job eventually.Read more