No products in the cart.
Sale!
ARHIKY Iron on Heat Transfer Vinyl Roll HTV for T-Shirt(12″ X8′,Black) Black 12Inch×8Feet
$18.99
Easy to cut and transfer: your designs don’t come off when weeding, pull apart easily and won’t stick to the carrier sheet; The cut lines are easy to see.
Durable and flexible: the heat transfer vinyl (HTV) paper is made thinner and stronger, so it flexes more easily and durable, it won’t fade, peel or crack when applied correctly, withstanding multiple washes and rugged play
Size: each roll measures approx. 12 inch x 8 feet, it will dramatically increase the number of designs, letting you cut specific designs in most size without reducing the quality or effectiveness of the heat press
Wide range of use: the HTV black vinyl roll can be applied for a variety of clothing wear, including hats, shirts, sweatshirts, arts and crafts, great for personalized designs, stylish enough for express yourself
Method of use: using cutting plotter to carve the pattern you want, tear off the excess part, set flush, bottom die on it then iron-on; Cold peel: peel off the polyester backing film only when it cold
Date First Available: June 27, 2019. Manufacturer: ARHIKY. Item Weight: 7.8 ounces. Best Sellers Rank: #4,909 in Arts, Crafts & Sewing. Customer Reviews: 4.5 out of 5 stars 3,844 ratings 4.5 out of 5 stars. ASIN: B07TMLX5SQ. Item model number: HTV-12×8′-Black. Product Dimensions: 12 x 1.2 x 1.2 inches.”
| Weight | 7.8 lbs |
|---|---|
| Dimensions | 12 × 1.2 × 1.2 in |
4 reviews for ARHIKY Iron on Heat Transfer Vinyl Roll HTV for T-Shirt(12″ X8′,Black) Black 12Inch×8Feet
Add a review
Related products
Sale!
Iron-on Transfers
Heat Transfer Vinyl HTV for T-Shirts 12 Inches by 5 Feet Rolls (16 Pack)
$111.99
Sale!
Iron-on Transfers
FURWEY HTV Vinyl Black 12Inch ×20Feet Heat Transfer Vinyl Roll Iron on Vinyl for T-Shirt
$19.99
Sale!
Rob –
This vinyl is wonderful! I was in a bind & needed it for a project as soon as it was delivered; so I opened up the box to find it was cold peel. My first experience, but no big deal- this thoughtful company has a full size page front & back of very thoughtful directions on cutting, ironing, etc. They miss no details which made me super confident I would have no issue. It’s a bit tricky to figure out which side is the “face down” (transfer sheet side) as neither are very shiny, but it literally took me two seconds to put my fingernail between the two layers & identify the correct one. It cut like a breeze & it feels very thin but as soon as I began weeding it- I found that this vinyl has an almost “jersey” feel to it which makes it EXTRAORDINARILY simple to work with!! I pressed it for the allotted time & temperature on their thoughtful instructions, & then shook the shirt out to cool it off (I was in a real hurry to use this- like as soon as it got delivered I had to deliver the shirts in 30 minutes) & it cooled after about 2 minutes & I removed the transfer sheets & the vinyl adheres beautifully!!! This stuff is fabulous, the company is thoughtful & I will absolutely make this purchase again!!!Read more
JNSHANGMAO –
The media could not be loaded. This HTV is packed very well, it’s packed in a box, the box is beautiful, the HTV is protected, I like it. I will use Silhouette Cameo 3. I will adjust the parameters to: Blade: 1, Speed: 8, Force: 4. Pass: 2. It is very easy to discharge waste, and it is a little sticky. The viscosity is not that strong, which is just right. Keep in mind that an old/well used blade may require higher cut settings than a brand-new blade. Use a certain amount of pressure in the reconversion process. Hold the iron steady in one place, The temperature of the electric iron is controlled at 150℃ /300 ℉for 10-15 seconds. In the end, Peeling the clear pet film after the vinyl turns cold, matting effect (Recommended to wait 15-30 seconds for the vinyl to cool down.) I’ve done it several times and it’s been very good. It’s a great product to recommend.Read more
#MamaOf8IDontQuit –
15′ of white heat transfer vinyl is a lot! I had a shirt order for a set of twins. Mom wanted everyone to have their own, each one was personalized. I used design space from cricut and cricut machine to cut the vinyl. -the vinyl is pretty thicker than other brands. -the vinyl does have a sticky carrier. It’s a huge plus for me!!!! -I used my Large industrial heat press at 300 degrees and pressed it for 12 seconds and I actually peaked it cold. I then went a second time and pressed it again for 5 seconds I applied a teflon sheet over the vinyl and pealed the teflon sheet as soon as it came off the heat press. Dispite other reviews, because this vinyl is thicker it will take a few trys to get the right temp and time when pressing on a t shirt…. take your time. I’ve never used a home iron on this so I cannot say anything good or bad about this vinyl. But definitely worth it to try for the 15′ of this vinyl for the price. Give it a shot! This vinyl will allow me to make more room for profit in my tshirt business!Read more
jeff –
Reading the five star reviews only tells me they never tried a better product. Can’t believe someone actually states this stuff is THICKER and BETTER. Are you kidding, or just a faked review ?!?!! For comparison, just tried another brand for a test . Set the Brother ScanNCut SDX125 to half cut, auto pressure. Perfect results. Clean cuts, decent weeding, everything that needed to be in place, stayed in place. Then we went back to this roll. OMG. Test, test, test, finally at FULL cut -6 pressure to get usable results. However, on detailed areas, the brand new blade (that just performed perfectly on another product), is lifting edges of weeding areas as it’s cutting. Crux of the problem is ULTRA THIN vinyl requires an excessive amount of fuss to cut through, while not going through the backing. Then comes the weeding. If you’re doing any lettering, you bet they want to come up along with the waste, as this thin stuff just does not stay attached to the backing. By comparison, this has a looser, gooey bond to the vinyl backing, vs FIRM bond the better brands have. Ultimately, I consider this product a waste. As newbies with this machine, I’m glad we had another brand on hand to try, as my wife was getting ready to abandon this project all together. While this appears to be a better bang for your buck, the bang ultimately is from your head contacting the wall in frustration. With the exacting nature of the Iron on vinyls, this stuff has a loose bond to backing and is just too thin for workable results, particularly if you have any fine detailing. In this instance, the lettering was problematic for 3/8″ high characters, as well as 1 1/4″ high . Cannot speak to the iron on bonding process, as the cutting was so poor, we never got that far with this product. Bottom Line: Pay more for a better product if you want to ENJOY your time crafting. Would not buy again. Cannot recommend.Read more