Free Shipping on all orders! USE COUPON CODE NEW10 TO SAVE 10% OFF
- 25%

Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz) 16 oz VSS Only

(13 customer reviews)

This can remove many moderate to heavy surface imperfections. Works on all colors
Works like a compound, a polish and a cleaner
Eliminates surface imperfections
Wax and silicone free

$29.97

Added to wishlistRemoved from wishlist 0
Add to compare
SKU: B001TJIDF0 Category:

Scratch and Swirl remover is not a cover up product, a glaze, a wax or a quick solution. It is the 100 percent body shop safe scratch and swirl remover that does just that remove. Scratch & swirl remover is the one step solution for a variety of paint problems. ACU bead this superior diminishing body shop safe product works like a compound then becomes a polish. Will remove many moderate to heavy surface imperfections and 1500 1700 grit sand scratches, swirls, scuff marks spider webbing and most surface imperfection.

Specification: Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz) 16 oz VSS Only

Weight 1.1 lbs
Dimensions 8.27 × 2.36 × 2.36 in

13 reviews for Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz) 16 oz VSS Only

4.0 out of 5
8
1
2
0
2
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. BILL RICHARDSON

    I have used all 4 of the v series compounds on a new black bc/cc paint job. I was having problems with swirls after using the V38 compound. So I ordered some of the VSS hoping to solve the swirl issue. I believe the swirls were worse. I tried every pad, different pressures, different amounts of polish and different durations. So I purchased some 3M ultrafine ex #3 polish, and the 8″ pad. After about 15 minutes working on a panel the swirl marks are gone. The 3M number I used is 06068. So if you are having issues with this product line and swirls, try the 3M/ product. You wont be disappointed.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  2. Dylan

    With the proper prep and technique this is a wonderful product. If you’re nervous about hurting your paint, study up and go slow. Paint correction takes patience and preparation. I’ve had nothing but wonderful results, albeit with a beer break or two. Photo shows one pass with this product with a cheap polisher, below the stripe is the before. This was on a 16 year old civic.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  3. Power T

    This product works best with a DA polisher, not by hand. It also works best on black paint. On gray, it’s not as polished looking. You have to spend time to get the scratches removed, that’s because (no one seemed to point this out) the solution starts of coarse, then as you polish car more, the granules break down to aid in polishing the car. So once again, coarse to remove scratches, breaks down, to polish. Don’t rush the work. It should end up being a dry haze to know that the solution has broken down. You won’t regret results. Not sure what those other reviewers did, but you should not get more scratches on your car. Perhaps they were too impatient. You have to wait until the solution breaks down.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  4. Haley Jauregui

    So at some point I must have scrap my garage.. it let a ugly scratch on my 2016 pilot. When we applied this product I was a bit nervous .. it goes on thick. But my husband watched the chemical guys video on how to apply it.. follow the video step- by -step! The product is think and gritty. I was impressed it got the whole scratch out..Read more

    Helpful(0) Unhelpful(0)You have already voted this
  5. Brusselwilson

    First attempt at doing any kind of paint correction and this stuff seemed like the ticket for my swirlmarked, water spotted, and scratched truck. I bought a cheap Harbor Freight DA polisher, a 3 pack of Chemical Guys HexLogic pads, and this polish. Overall this polish seems to work very well at getting rid of swirl marks, water spots, and light scratches. Had some deeper scratches on the roof of my truck from the previous owners and after one pass with this polish they weren’t completely gone, but they were greatly knocked down to the point that they were much harder to see. Water spots and swirl marks are completely gone. The deeper scratches definitely require a more heavy-cutting polish to completely remove, but the VSS did a great job to disguise the scratches.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  6. Douglas Clark

    There were two areas on our car with medium damage to the paint. The hood was especially dull probably from jillions of random microscratches in all directions. I sort of wondered if it was even a bit oxidized or even with clear coat worn off. One side panel had scratch damage from something that rubbed that area several times. I clayed the hood before I polished with this stuff. I used a clay “bar” or “pad” on the hood that left a lot of new, directional scratching. I used my Torq 10FX random orbital polisher to work this stuff over the paint. I was Wowed when I wiped it off! Check out my before and after pictures. Pretty obvious which are before and which are after. I tried a tiny area, doing it by hand rather than with the random orbital polisher. Not near the same results and possibly leaving some new light scratching. Maybe that was due to my technique. I removed using this stuff and my RO polisher.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  7. S Leonard

    I have virtually no experience doing this. I am however rather tenacious and eager to learn. I contacted Chemical Guys and they gave me great recommendations on what I can do as a novice wanting to detail my vehicle. The scratch which appeared after what I believe is someone dragging something along my door and I really wanted it gone. I bought the Scratch and Swirl remover along with the Torx10x buffer. I followed the YouTube videos of which they have a plethora to learn how to remove the scratch. It was very easy and as you can see from the pictures. I am very pleased with this product and plan to do the rest of my truck using their polishing products. This particular product is an all-in-one as it has mild abrasives that break down as you buff it in. The other products require you to step through progressively less abrasive compounds to get similar results. I had every intention of trying those if the scar was not satisfactorily removed with this one. I was told by a most helpful Robert when I called Chemical Guys that you can use this without a powered buffer but it will of course require considerably more time/elbow grease.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  8. Amazon Customer

    If I could leave less stars I would. I purchased this product because I trusted “my chemical guys” and was looking to get rid of my “towel swirls” on my Tesla Model S. And after applying this product the granular never “broke down” with a foam applicator, when I finished the hood and wiped away, the swirls WERE 1000X times worse. DO NOT BUY. I now have to figure out how to get rid of the damage this has caused to my clear coat.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  9. Anon

    I was browsing the internet to find this one, as I was looking for something to remove light swirls and scratches to sell a car. I watched a few videos before purchasing. It’s been a while since I’d done any detailing and thought it looks good, I’ll give it a go. After claying the car and only having a cordless drill (needed a da to get the final finish), I polished the car and the results are amazing, if I had a da, all the scratches would have come out, but I got 99 percent out. I’m going to use this on my car and can’t wait to see the results on a black car. Would recommend, brilliant productRead more

    Helpful(0) Unhelpful(0)You have already voted this
  10. dave knapp

    An annoying ‘scuff’ on windshield from an ancient wiper blade, not illegal but still there after using this product, will continue to live with it.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  11. Be safe

    Don’t think it’s anything extra special but did the job of making the car shine againRead more

    Helpful(0) Unhelpful(0)You have already voted this
  12. jason mcevoy

    Excellent qualityRead more

    Helpful(0) Unhelpful(0)You have already voted this
  13. DJ

    I was hoping for more? I think Bilt Hamber resin polish betterRead more

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz) 16 oz VSS Only
    Chemical Guys COM_129_16 Scratch and Swirl Remover (16 oz) 16 oz VSS Only

    $29.97

    Add address

    CartGet - Your Digital Corner Store
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart