Family Swimming Pool, Your Summer Water Party!
Material: High-strength hot carbon tough PVC layered independent airbag
External diameter: 82.67*62.99*23.62in
Internal diameter: 64.96*39.37*6.29in
Step 1:After unpacking, unfold it completely and lay it flat on a clean and smooth ground.
Step 2:From the bottom to the top, inflate layer by layer with the electric air pumb, inflate to 90% -95% saturation, and then press down to parallel to the body of the pool.
Step 3:After inflating for 8 hours, there is no air leakage, and then add cold water before hot water (after mixing with water). The temperature must not be higher than 50℃).
Step 4:After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it.
Step 5:Open the vent valve, completely deflate and put it in a PE bag and place it in the shade.
1*Kiddie Swimming Pool
1*Electric Air Pumb
1.Please be careful and do not use a knife or other sharp tools when unpacking.
2.Do not inflate too much, because it is a plastic material, the principle of thermal expansion and contraction of rubber, inflatable products have their own extendibility.
3.When you first receive the goods, the size will be small, there may be an error of about 5-10 cm, and it will return to normal after you charge more times.