Free Shipping on all orders! USE COUPON CODE NEW10 TO SAVE 10% OFF
- 29%

Impresa Water Filter Stand 8″ Tall by 9″ Wide Compatible with Berkey, Countertop Stainless Steel Stand for Most Medium Gravity Fed Water Coolers – Fills Tall Glasses, Pitchers, Pots with Water

(11 customer reviews)

Water Filter Stand: Impresa Products 8″ tall by 9″ wide water filter stand compatible with the Big Berkey Water Filter System, Royal Berkey, Berkey Light Water Filter System and Travel Berkey Water Filter System. Fits any freestanding water filter system with a base of 9’’ or less in diameter.
Finally, A Tall Water Filter Stand: Standing at 8 inches tall, this countertop stand easily fills glasses, pitchers, and water bottles. This solves the problem of only being able to fill short cups or delicately balancing your water filter on the edge of your sink.
Polished Stainless Steel Stand: Built to last with quality polished stainless steel and expert craftsmanship. The non skid rubber feet provide stability on slippery surfaces, and help to prevent the counter top from being scratched.
Strong and Steady: The rubber feet help to provide stability on slippery surfaces, and prevent the counter top from being scratched.
Stylish And Functional: The raised edges help to provide a secure fit for your water dispenser.

$49.34

Added to wishlistRemoved from wishlist 0
Add to compare
SKU: B07WWSHRYR Category:

Impresa Products 8″ tall by 9″ wide water filter stand

Compatible with the Big Berkey Water Filter System.
The stand is also compatible with other medium sized water filters which are 9” in diameter.

Tall Enough For Pitchers And Water Bottles

Fed up of stands that don’t allow enough room to fill bottles and pitcher? Then look no further! Standing at 10 inches tall the stand allows
you to easily fit water bottles, pitchers, cups, and glasses beneath the spigot. No longer are you limited to filling small cups, mugs, and glasses.

Quality Craftsmanship To Last A Lifetime

Made with high grade polished stainless steel to the highest standard of craftmanship that should not bend, break, snap, or fail. Designed to hold your
water filters forever.

Strong And Steady

Built to withstand the weight of a cooler filled with water. The stand has raised edges to decrease the risk of the water filters slipping off.

The rubber feet provide a non-slip base to help avoid slipping and scratching your countertop.

Specification: Impresa Water Filter Stand 8″ Tall by 9″ Wide Compatible with Berkey, Countertop Stainless Steel Stand for Most Medium Gravity Fed Water Coolers – Fills Tall Glasses, Pitchers, Pots with Water

Weight 1.9 lbs
Dimensions 8 × 9 × 9 in

11 reviews for Impresa Water Filter Stand 8″ Tall by 9″ Wide Compatible with Berkey, Countertop Stainless Steel Stand for Most Medium Gravity Fed Water Coolers – Fills Tall Glasses, Pitchers, Pots with Water

4.6 out of 5
8
1
2
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. VF

    Appears to be a very sturdy stand for our Royal Berkey. I was even able to place a rather tall 28oz water bottle under it to fill. Make sure you consider how tall it will make your Berkey. This might seem obvious, but something to consider. I now have to use a small step stool to fill at the top but I like the convenience of the stand so much that it isn’t a bother at all. My only gripe with the stand is it came wrapped in a crazy amount of plastic wrap… and I’m not talking about shipping wrap. Like food storage wrap, and I can’t figure out why that was necessary. It had me saying, “what the actual F” out loud, but once I got it all off, I was pleased with how it looked and how easily it holds the Berkey.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  2. Amazon Customer

    Update: I reached out to the manufacturer to inform them of the issue and they were very helpful and courteous in dealing with the issue. I believe what I ran into was a logistics issue. For full transparency I’ve kept the original text of the review below but have update from 1 to 3 stars based on the support I received. The stand is honestly quite nice, but the height discrepancy was a showstopper for me based on the containers I use for water not fitting under the spout (they would have fit fine with a true 10″ stand). A note to anyone who sees this review in the future. The item description may have been changed to reflect the correct height, but said 10″ tall when I purchased. Original text based on my initial frustration upon receipt of the stand: This might be a decent stand if they didn’t lie in the item description and in the pictures! The stand we received was only 8″ tall instead of 10″Read more

    Helpful(0) Unhelpful(0)You have already voted this
  3. Just_the_facts

    Had to laugh at other’s remarks/concerns on, quote “legs are not all the same length”. I received mine, and yes, one of the 4 legs, did marginally teeter a little. However, when you put the Berkey on the unit, the “teeter” completely goes away, and the Berkey is 100% level and plumb – due to even weight distribution. That’s the problem with these amazon reviews… there are so many idiot statements made, that it is difficult to rely on what “others say”. I gave it 5-stars, as it looks good, it does the job, and it was CHEAP in cost…. what more do you want?Read more

    Helpful(0) Unhelpful(0)You have already voted this
  4. mischacooks

    I got this stand as my Berkey was either sitting on the edge of the counter or on top of an overturned pot. My Berkey doesn’t leak, but I’ve been known to accidentally leave the spigot open when it’s empty and then refill the upper container resulting in water all over the floor. So, this stand allows me to place it with the spigot over the edge of the sink, just in case. This also allows me to use the spray nozzle next to the sink to easily fill the top part. The stand feels very sturdy, however, it’s good to be aware that you may need to very gently splay the feet, so that it is as solid as possible. The rubber on the feet really helps keep this from scooting around.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  5. Bruce

    had the ss filter tank sitting on edge of counter but didn’t like it like that. Looking for a stand I saw this option was higher and waved my ruler around to see what would fit. Coffee pot, check. Water jug, check. Water bottles, check. I am very pleased with the tallness and the rubber coated feet and the overall sturdiness of this stand. Thanks!Read more

    Helpful(0) Unhelpful(0)You have already voted this
  6. John Kully

    I have an Alexapure Pro Water 2.25gal Filtration System, but it came with a 6″ high stand…I needed at least a 8″ high stand to allow my 30oz Mugs (Yeti/Ozark Trail…) to sit under the spigot and this worked prefect for my needs…Read more

    Helpful(0) Unhelpful(0)You have already voted this
  7. jacreha

    This stand is sturdy and looks great. We have the Berkey Royal, so this matches the stainless finish, fits our filter, and allows for easy refills.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  8. Mr. & Mrs.

    I don’t know what has taken us this long to buy a stand for our big berkey. We’ve owned the berkey for 5 years and never bought a stand! I chose this one over the berkey name brand because other reviewers mentioned how short the berkey stand was. I wanted to be able to put a regular glass under it with ease and so my kids can, too. Great purchase!Read more

    Helpful(0) Unhelpful(0)You have already voted this
  9. Lucy Black

    Great size for the Big Berkey – I can fit pint glasses and the kettle under it very easily. It’s sturdy, and ideal for its purpose. However the finish on mine was poor, with sharp metal bits where the metal had been sheared off. It’s not a big deal because it’s not like we’re handling it every day but it’s disappointing, particularly given how expensive this item is. It’s not good value for money because the price far exceeds the finished quality which feels cheap. But it does what it’s supposed to do.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  10. Tocsin Data

    Could have been made a little smaller in diameter for a better fit, but is good enough to raise the unit for the spout.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  11. Denise Salter

    bought for the Berkley water filter system.Read more

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    Impresa Water Filter Stand 8″ Tall by 9″ Wide Compatible with Berkey, Countertop Stainless Steel Stand for Most Medium Gravity Fed Water Coolers – Fills Tall Glasses, Pitchers, Pots with Water
    Impresa Water Filter Stand 8″ Tall by 9″ Wide Compatible with Berkey, Countertop Stainless Steel Stand for Most Medium Gravity Fed Water Coolers – Fills Tall Glasses, Pitchers, Pots with Water

    $49.34

    Add address

    CartGet - Your Digital Corner Store
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart