Free Shipping on all orders! USE COUPON CODE NEW10 TO SAVE 10% OFF
- 30%

iOttie iTap 2 Magnetic Air Vent Car Mount Holder, Cradle for IPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones Air Vent Mount

(13 customer reviews)

Rare Earth Magnets: Features 2 strong hold magnets powerful enough to handle any phone
Universal Mounting: A universal mounting solution that will hold most smartphones, as well as their cases, and GPS devices
Metal Plate Options: Provides a choice of an inner and outer metal plate; Each plate uses an adhesive tape to attach to select mounting location and is easily removable
Rotating Angles: Provides a rotating ball joint to help provide 360 degree viewing angles to allow the user an enhanced view of their smartphone or GPS Device
Vent Clip: Twist and lock vent clip allows for a secure fight on most air vent blades.Hassle Free: iOttie offers manufacturers on all products

$34.95

Added to wishlistRemoved from wishlist 0
Add to compare
SKU: B07HGDWLNM Category:

The iTap Magnetic 2 Air Vent mount is a compact and powerful magnetic mounting solution that holds smartphones in any vehicle. Designed for safety and convenience, the tap 2 features two rare-earth magnets that provide a strong hold for all smartphones and case combinations. The mounting system includes a metal plate kit with small and large metal plates and a protective film that attaches directly on the back of the smartphone or case and does not interfere with wireless charging when positioned accordingly.

Specification: iOttie iTap 2 Magnetic Air Vent Car Mount Holder, Cradle for IPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones Air Vent Mount

Weight 0.48 lbs
Dimensions 2 × 2 × 2 in

13 reviews for iOttie iTap 2 Magnetic Air Vent Car Mount Holder, Cradle for IPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones Air Vent Mount

3.5 out of 5
6
2
1
0
4
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Keane

    I’ve lost all faith in thewirecutter.com 1. Magnet too weak to hold an XR iPhone 2. Only 1, “through case”, magnetic pad supplied and an outrageous $6 cost for additional ones. We need 3Read more

    Helpful(0) Unhelpful(0)You have already voted this
  2. Josh

    Do not buy. Magnet is too strong for iPhones. I have an iPhoneXR and it overheated and drained my battery forcing my phone to be completely useless and shut off. Within four hours of minimal use my phone went from 100% down to 11%. That usually takes an entire 16 hours of moderate to high use. If a magnet is too strong it will interfere with electronic components and this is true when it comes to this product. Also, it made my phone incompatible with the wireless charger I purchased with the phone. Used this for 1 day and now it’s garbage. Waste of money.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  3. skijhn

    This magnetic mount is not suitable for larger phones. I have a Note 8 and the magnet was just not strong enough to keep the phone in place. Any movement by the car would cause the phone to slip and eventually just fall off. Important to mention that I did use the larger magnet (they include a small and a large magnet) mounted on the center of the back of the phone (I was willing to sacrifice wireless charging functionality).Read more

    Helpful(0) Unhelpful(0)You have already voted this
  4. Nicholas

    I was in desperate need for a phone mount in my car. Driving long distances with the need for navigation made it a necessity. I first went with this, and I have mixed feelings. While the product overall is a 10/10 in build, and stability I don’t recommend it especially when it comes to iOttie’s other options. For example this mount in the summer in high heated locations is absolutely terrible. On many instances I was driving home, towards the sun and my phone shut down due to the sheer heat of being directly on the dashboard with the sun beating down. If your in a location with low heat weather I recommend it, but your much better off going with something like the disc tray mount, as it’s near the air conditioning, and isn’t at risk for heat related shutdown or damage.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  5. Justin

    Great mount. I have been using extensively for the past two weeks and it works fantastic, iOttie has done it again! I am using this mount on an iPhone XS Max with an Otterbox Symmetry case. While the large silver plate is not strong enough through the case, the small black plate installled on the outside of my case works flawlessly. If I do not use the case, the silver plate sticks very well to the mount. This mount may run into problems with larger, heavier phones as the actual vent grips may not fit every vehicle well. (-1 star) The plates do not interfere with wireless charging, when placed near the bottom of the device, but heat from the phone did appear to warm up the magnetic plates during my use. I would eye on the side of caution for those who plan on still using wireless charging.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  6. Ben

    I purchased this mount for my iPhone XS that sits in a pelican case. I was initially concerned that the case would be too “heavy duty” to be used with this mount, but took a chance. Due to version 2 having two (2) magnets, I believe it made all the difference in being able to use my case. It’s sits firm and I can feel the strength of the pull/hold as I attach and detach the phone. The phone does slip/slide to the side if I’m on very bumpy roads, but if it’s a well paved roadway, I have no problems at all. I feel if I had a lighter weight case, that slippage would be virtually eliminated. I attached the larger metal plate of the included two (2) to the bottom end of the case, where the charging cable would go. I did so as I was planning to try wireless charging in the future and needed to keep the back of the phone clear of obstruction as much as possible. I have yet to try that feature and don’t know as of yet if my placement of the large metal plate will prohibit that. Because I placed the large plate at the bottom edge of the case, orienting the phone portrait wise isn’t as stable due to the leverage and weight of the phone and case. If wanting to orient the phone horizontally, I’d recommend placing a metal plate in the center of the case/phone. This is no problem for me as my phone sits primarily in the vertical position. The vent clips and lock are solid. The plastic material is thick and appears to be quite heavy duty. For the few weeks that I’ve owned this mount, I’ve had no problems with the mount on my vent (placed on a 2018 Toyota 4Runner, far left, driver side) or it’s stability. The magnets affecting the phone function are zero. Rare earth magnets are used so it won’t affect electronics or demagnetize things. Overall, I’d highly recommend this mount to anyone looking for a phone mounting solution. I was thinking of going with a cradle, but am real happy that I went the magnetic route. Phone is on and off in seconds and is extremely minimal.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  7. Dr. Bourne

    Wireless charging won’t work with the magnetic plate on the back. But overall a very sturdy car mount. Only downfall is the included suction cup adhesive mount for the dashboard is NOT a hard mount plate. Only a thin layer of 3m FILM.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  8. Retiredhippie1

    Over 50 plus years of driving and trining to secure CB rigs,GPS Receivers ,assortment of CD players Cassette players ,Radar devices and other things that I tried to hook up over the years this one REALLY WORKS I had it fall once but it was probably my error It holds horizontal or vertical without any problem you just have to find the sweet spot and off u going with one less problem that you face while driving again 5 stars⭐️⭐️⭐️⭐️⭐️⭐️Read more

    Helpful(0) Unhelpful(0)You have already voted this
  9. Mr p r stenton

    wanted small neat phone holder ,but not on windscreen, does the job pefectRead more

    Helpful(0) Unhelpful(0)You have already voted this
  10. Fateha Khanum

    Its been a month now. Am also a new driver so. I make mistakes. My phone does not budge at all. Its very strong the suction pad. And the metals that come with are great powerfulRead more

    Helpful(0) Unhelpful(0)You have already voted this
  11. timothy c i morland

    Easy to install, very sturdy adhesion to dash and strong magnet to secure phoneRead more

    Helpful(0) Unhelpful(0)You have already voted this
  12. Orestis

    Excelent product. Fits right into the CD slot and holds the phone firmly and securely.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  13. SimonHF

    I choose this device because it looks Slimline. I have a large phone A Galaxy Note 10 plus. I put the metal plate at the base of the back of the phone. However the magnetic force is not enough to keep the phone in place during driving. The phone will slowly rotate the left or to the right especially if there is any type of bumping. When the phone rotates enough then it will reach a tipping point and simply fall off causing a potential accident. I wrote to the manufacturer and told them about this and they felt sure that it was because the metal plates supplied were defective. They sent me new metal plates but it made no difference at all. Having tried several other magnetic holders in the meantime then I now believe that I know what the problem is. Most other magnetic mounts appear to have four strong magnets and their mounts but this mount only has two magnets. That means half as much hold and two magnets stop the phone rotating less than four magnets. I believe that if you have a smaller phone or if you mount the magnetic plate in the middle of the back of the phone this isn’t so much of a problem. However if you have a larger phone like me and because of the layout of your car you want to mount the plate at the bottom of the back of the phone then this can lead to a dangerous situation where the phone falls off the mount. Or at the very least the phone will slowly rotate while driving causing you much frustration for example if you are trying to use the navigation app. I actually like the quality of the product but I get the feeling that it was engineered when smaller phones were fashionable. The manufacturer needs to update the design and also take customers seriously.Read more

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    You may also like…

    iOttie iTap 2 Magnetic Air Vent Car Mount Holder, Cradle for IPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones Air Vent Mount
    iOttie iTap 2 Magnetic Air Vent Car Mount Holder, Cradle for IPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones Air Vent Mount

    $34.95

    Add address

    CartGet - Your Digital Corner Store
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart