Free Shipping on all orders! USE COUPON CODE NEW10 TO SAVE 10% OFF
- 34%

Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel

(16 customer reviews)

Keyless entry with a motorized driven deadbolt for 1-touch locking, low battery indication, and easy install with just a screwdriver
For use on exterior doors where keyed entry and security is needed.Customizable automatic door locking after 10-99 seconds for peace of mind
6 customizable user codes along with temporary codes that can be used just once, perfect for visitors and service personnel
Single cylinder electronic deadbolt operates by keypad or key outside and thumb turn inside, fits door thickness of 1-3/8 in. to 1-3/4 in. Alarm sounds after 5 consecutive entries and the keypad is deactivated for 45 seconds
Includes an adjustable latch to fit all standard door preparations

$79.20

Added to wishlistRemoved from wishlist 0
Add to compare
SKU: B00R7JVFCE Category:

The Kwikset Electronic Deadbolt delivers the ultimate in keyless entry convenience with up to six individual customized user codes. It’s a perfect fit for an active lifestyle so that you don’t have to worry about carrying or losing keys. You can also easily provide temporary or one-time use codes for access to visitors or service personnel.

Specification: Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel

Weight 2.46 lbs
Dimensions 5.51 × 3.54 × 9.45 in

16 reviews for Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel

3.5 out of 5
6
4
2
0
4
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Susi Johnston

    The programming instructions are just fine. But you have to take the time to read them and understand the pattern of logic in all of those keypad entries. Here’s a clue (I put 0000 as the user code, as this is the factory default when you first get the lock): Think of the “Kwikset” button as “ENTER”. I will call it that from here on. Think of the PC (programming code) as a “key” to let you into the space where special “boss only” functions can happen. Every time you want to do something other than unlocking the door, you need to use your “key” to be able to do it. When you enter the “key” (by pressing 0000 ENTER), you’ve entered the “control room”, and then you can do “boss only” stuff. Each of the ten “boss only” special functions has a number. There are ten buttons on the keypad and each on has a special function. These functions are: 0 – RESTORE DEFAULT ORIGINAL FACTORY SETTINGS (only AFTER you have hit the “reset” button.*) 1 – ADD A USER CODE 2 – DELETE A USER CODE 3 – DELETE ALL USER CODES 4 – CHANGE YOUR PROGRAMMING CODE 5 – ENABLE/DISABLE AUTO-LOCK** 6 – CHANGE AUTOLOCK TIME DELAY 7 – MUTE/UNMUTE LOCK** 8 – ENABLE/DISABLE ALL OF THE USER CODES** 9 – ADD A “ONE TIME ONLY” USER CODE Now, pay attention to the pattern of keypad commands. The pattern is: 0000 + ENTER + [ special function number ] + ENTER This is the pattern to engage any of the ten special functions (see list above). If the function involves a number (user code), then you add + [the number] + ENTER after the pattern above * Resetting to factory/default settings begins with pressing the tiny reset button, which is on the inside/back of the lock, underneath the removable cover that you just lift up and lean toward you to release. It’s in a little hole, so you’ll need a ballpoint pen, un-bent paperclip, or some other small thing that can fit into the tiny hole. When you first press it, there is a beep. DON’T RELEASE IT, keep pressing and wait . . . quite a long time . . . until you hear THREE beeps. Then it’s reset. ** All of these “enable/disable” functions can be tricky, because it’s not very clear if you have enabled or disabled when you key in the sequence. I noticed that the ENTER button illuminates green for enabled and red for disabled. FINALLY . . . there seem to be some really sensitive parameters with this little unit, when it comes to TIMING. If you key things in too fast or too soon, or too slowly or too late . . . it doesn’t work. I have three of these locks, and they are all persnickety about the timing, but one of them is EXTREMELY persnickety. This leads to some frustration, when using a special function FAILS again and again. Until it finally SUCCEEDS!Read more

    Helpful(0) Unhelpful(0)You have already voted this
  2. Ed B.

    Delivered July 5, installed July 6, first steady rain July 22. Kwikset would not unlock this morning. Batteries are good, keypad lights up as normal. I disassembled the lock after using the key to unlock it and found water inside. The tiny little motor was soaked. I dried it out with a hair-dryer but it’s now dead. The reset button beeps but it’s totally non-responsive after that. Do not buy this for an outdoor installation. Ed B.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  3. Chris

    I read some mixed reviews on this product that had me nervous about my purchase originally, but I experienced only positive results. I bought this for my parents house. They come and go a lot, and us kids stop by, etc. and I thought it would be a fun gift they would never think to buy but would love. I bought the product and it came 2 days later via Prime. The reviews I read were all pretty positive about the quality of the unit but were VERY mixed when it came to installation and programming. Some left paragraphs on how hard both were and you should set aside 3-hours to complete, and then other reviews were basically “Great! Super easy install.” So I had no idea if I would be able to figure this out, I’m not super handy—I’m tech savvy so I figured I could get the programming done easy but the install I wasn’t so sure about. But you know what? I’m in the “super easy install” group! —Hardware Installation— I installed this bad boy in roughly 30 minutes (I used a drill to screw and unscrew, so maybe add time if you’re doing that by hand) and this wasn’t a new door that had now deadbolt hole or anything. I was replacing a traditional deadbolt, basically unscrew everything from the old deadbolt, and then follow the directions to install this one. I knew taking the old one out would be easy, but installing the new one I wasn’t so sure about. The directions admittedly weren’t the greatest, but if you follow the steps (looking at the pictures as reference) and think about what you’re doing it’s pretty basic. Again, it took me under 30 minutes to install and I was talking to my parents about something while doing it. —Programming— Now this part was easy to me. At first it’s not obvious how it works, but after looking at the directions I realized it’s VERY easy to program. Simply follow the steps in the programming guide. It’s basically your programming code followed by “kwikset button” followed by the number associated with the task you want to perform, then “kwikset button” to start the task (i.e add an unlock code, change auto-lock time, etc.) —After a few days— My parents love it. They thought it was cool to begin with but after a week of use they find it to be super convenient and useful. The only thing I with it had was a separate button to illuminate the keys at night. If you press ‘Kwikset’ they turn on for .3 seconds and if you press a random number you have to then press ‘Kwikset’ to cancel out what your typing to start the actual code. Basically if it’s really dark you need to know where the first button is in your unlock code number so it illuminates, then you can see the rest. Otherwise it’s great. For the price this product is amazing. Super nice build quality and works as it says.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  4. Héctor

    A simple vista el producto se ve de buena calidad y tiene excelentes acabados. Hice mi pedido el 22 de marzo y recibí el producto el día de ayer (3 de abril) lo cierto es que mencionaba que no tenían el producto y que me notificarían cuando estuviera disponible. Actualizacion 07/04/18 La instalación fue sencilla aunque hay q mencionar q sólo vienen en inglés las instrucciones, pero casi con seguir las imagenes se logra la instalación, lo q si no esta completo son las instrucciones para la configuración de la chapa, la configuración inicial es: 0000 + la tecla kwikset + 0 + kwikset Con esta clave se inicia el proceso de configuración si lo realizaron correctamente se debe cerrar y abrir el cerrojo de forma automatica, el resto de los pasos de programación estan correctos, de igual forma todo esta en inglés. Espero esto les sirvaRead more

    Helpful(0) Unhelpful(0)You have already voted this
  5. Carla P.

    I’ve been using this lock for a few weeks, and all seemed fine… Until we had our first -20 day. Wouldn’t open, couldn’t get the key in to unlock it manually. Had to borrow a hair dryer from a neighbour just to thaw it. It’s a waste of money for an outdoor lock in Alberta.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  6. Juan G.

    El candado es excelente y más al precio que lo compre de menos de 700, cuando fácilmente este tipo de candados valen el doble, eso sí recomendado únicamente para puertas lisas, es decir puertas que no tengan vidrio o una ventana a un lado ya que si las rompen es muy fácil de abrir por dentro, ya que es de perilla, así que piensen bien si es para ustedes por este detalle que pocos observan.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  7. Alan S

    I install & service Doors & windows as part of my business. I was looking for a keypad lock for my own home to eliminate lost or forgotten keys etc… I checked local hardware stores and they had similar pricing for Schlage & Weiser products very similar to this one, but far more expensive. The Schlage & Wesier units are in th $150-$200 range. I was looking at getting 3…….. Then i found this one on Amazon for only $45… So i ordered 1 last week and have installed it on my front door. It was an easy install to replace the existing deadbolt in 1 5/8″ hole. Setup is quite simple if you read and follow the instructions. First step is to set it for RH or LH operation, Then add your code, then delete the preset code of 1234. Tested and working perfectly ! (if you should mess it up, depress the reset button and start over). Seems like a very solid and well made unitand definitely on par with the far more expensive Schlage & Weiser units so I am going ahead and ordering 2 more for the other doors. Update : Bought 2 more and now have them on all 3 doors to my home & carport. All use the same code…….. no more fumbling for keys. No issues with cold…. rain or snow so far..Read more

    Helpful(0) Unhelpful(0)You have already voted this
  8. wayne p

    This lock works fine in summer and fall but freezes up often now the coldest part of a north western Ontario winter here. When it freezes you have to use the key. I don’t know if a name brand lock would also freeze. It was delivered on time and was an easy install. Other then the freezing issue it is a good lock set for the money.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  9. Susi Johnston

    The programming instructions are just fine. But you have to take the time to read them and understand the pattern of logic in all of those keypad entries. Here’s a clue (I put 0000 as the user code, as this is the factory default when you first get the lock): Think of the “Kwikset” button as “ENTER”. I will call it that from here on. Think of the PC (programming code) as a “key” to let you into the space where special “boss only” functions can happen. Every time you want to do something other than unlocking the door, you need to use your “key” to be able to do it. When you enter the “key” (by pressing 0000 ENTER), you’ve entered the “control room”, and then you can do “boss only” stuff. Each of the ten “boss only” special functions has a number. There are ten buttons on the keypad and each on has a special function. These functions are: 0 – RESTORE DEFAULT ORIGINAL FACTORY SETTINGS (only AFTER you have hit the “reset” button.*) 1 – ADD A USER CODE 2 – DELETE A USER CODE 3 – DELETE ALL USER CODES 4 – CHANGE YOUR PROGRAMMING CODE 5 – ENABLE/DISABLE AUTO-LOCK** 6 – CHANGE AUTOLOCK TIME DELAY 7 – MUTE/UNMUTE LOCK** 8 – ENABLE/DISABLE ALL OF THE USER CODES** 9 – ADD A “ONE TIME ONLY” USER CODE Now, pay attention to the pattern of keypad commands. The pattern is: 0000 + ENTER + [ special function number ] + ENTER This is the pattern to engage any of the ten special functions (see list above). If the function involves a number (user code), then you add + [the number] + ENTER after the pattern above * Resetting to factory/default settings begins with pressing the tiny reset button, which is on the inside/back of the lock, underneath the removable cover that you just lift up and lean toward you to release. It’s in a little hole, so you’ll need a ballpoint pen, un-bent paperclip, or some other small thing that can fit into the tiny hole. When you first press it, there is a beep. DON’T RELEASE IT, keep pressing and wait . . . quite a long time . . . until you hear THREE beeps. Then it’s reset. ** All of these “enable/disable” functions can be tricky, because it’s not very clear if you have enabled or disabled when you key in the sequence. I noticed that the ENTER button illuminates green for enabled and red for disabled. FINALLY . . . there seem to be some really sensitive parameters with this little unit, when it comes to TIMING. If you key things in too fast or too soon, or too slowly or too late . . . it doesn’t work. I have three of these locks, and they are all persnickety about the timing, but one of them is EXTREMELY persnickety. This leads to some frustration, when using a special function FAILS again and again. Until it finally SUCCEEDS!Read more

    Helpful(0) Unhelpful(0)You have already voted this
  10. Ed B.

    Delivered July 5, installed July 6, first steady rain July 22. Kwikset would not unlock this morning. Batteries are good, keypad lights up as normal. I disassembled the lock after using the key to unlock it and found water inside. The tiny little motor was soaked. I dried it out with a hair-dryer but it’s now dead. The reset button beeps but it’s totally non-responsive after that. Do not buy this for an outdoor installation. Ed B.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  11. Chris

    I read some mixed reviews on this product that had me nervous about my purchase originally, but I experienced only positive results. I bought this for my parents house. They come and go a lot, and us kids stop by, etc. and I thought it would be a fun gift they would never think to buy but would love. I bought the product and it came 2 days later via Prime. The reviews I read were all pretty positive about the quality of the unit but were VERY mixed when it came to installation and programming. Some left paragraphs on how hard both were and you should set aside 3-hours to complete, and then other reviews were basically “Great! Super easy install.” So I had no idea if I would be able to figure this out, I’m not super handy—I’m tech savvy so I figured I could get the programming done easy but the install I wasn’t so sure about. But you know what? I’m in the “super easy install” group! —Hardware Installation— I installed this bad boy in roughly 30 minutes (I used a drill to screw and unscrew, so maybe add time if you’re doing that by hand) and this wasn’t a new door that had now deadbolt hole or anything. I was replacing a traditional deadbolt, basically unscrew everything from the old deadbolt, and then follow the directions to install this one. I knew taking the old one out would be easy, but installing the new one I wasn’t so sure about. The directions admittedly weren’t the greatest, but if you follow the steps (looking at the pictures as reference) and think about what you’re doing it’s pretty basic. Again, it took me under 30 minutes to install and I was talking to my parents about something while doing it. —Programming— Now this part was easy to me. At first it’s not obvious how it works, but after looking at the directions I realized it’s VERY easy to program. Simply follow the steps in the programming guide. It’s basically your programming code followed by “kwikset button” followed by the number associated with the task you want to perform, then “kwikset button” to start the task (i.e add an unlock code, change auto-lock time, etc.) —After a few days— My parents love it. They thought it was cool to begin with but after a week of use they find it to be super convenient and useful. The only thing I with it had was a separate button to illuminate the keys at night. If you press ‘Kwikset’ they turn on for .3 seconds and if you press a random number you have to then press ‘Kwikset’ to cancel out what your typing to start the actual code. Basically if it’s really dark you need to know where the first button is in your unlock code number so it illuminates, then you can see the rest. Otherwise it’s great. For the price this product is amazing. Super nice build quality and works as it says.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  12. Héctor

    A simple vista el producto se ve de buena calidad y tiene excelentes acabados. Hice mi pedido el 22 de marzo y recibí el producto el día de ayer (3 de abril) lo cierto es que mencionaba que no tenían el producto y que me notificarían cuando estuviera disponible. Actualizacion 07/04/18 La instalación fue sencilla aunque hay q mencionar q sólo vienen en inglés las instrucciones, pero casi con seguir las imagenes se logra la instalación, lo q si no esta completo son las instrucciones para la configuración de la chapa, la configuración inicial es: 0000 + la tecla kwikset + 0 + kwikset Con esta clave se inicia el proceso de configuración si lo realizaron correctamente se debe cerrar y abrir el cerrojo de forma automatica, el resto de los pasos de programación estan correctos, de igual forma todo esta en inglés. Espero esto les sirvaRead more

    Helpful(0) Unhelpful(0)You have already voted this
  13. Carla P.

    I’ve been using this lock for a few weeks, and all seemed fine… Until we had our first -20 day. Wouldn’t open, couldn’t get the key in to unlock it manually. Had to borrow a hair dryer from a neighbour just to thaw it. It’s a waste of money for an outdoor lock in Alberta.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  14. Juan G.

    El candado es excelente y más al precio que lo compre de menos de 700, cuando fácilmente este tipo de candados valen el doble, eso sí recomendado únicamente para puertas lisas, es decir puertas que no tengan vidrio o una ventana a un lado ya que si las rompen es muy fácil de abrir por dentro, ya que es de perilla, así que piensen bien si es para ustedes por este detalle que pocos observan.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  15. Alan S

    I install & service Doors & windows as part of my business. I was looking for a keypad lock for my own home to eliminate lost or forgotten keys etc… I checked local hardware stores and they had similar pricing for Schlage & Weiser products very similar to this one, but far more expensive. The Schlage & Wesier units are in th $150-$200 range. I was looking at getting 3…….. Then i found this one on Amazon for only $45… So i ordered 1 last week and have installed it on my front door. It was an easy install to replace the existing deadbolt in 1 5/8″ hole. Setup is quite simple if you read and follow the instructions. First step is to set it for RH or LH operation, Then add your code, then delete the preset code of 1234. Tested and working perfectly ! (if you should mess it up, depress the reset button and start over). Seems like a very solid and well made unitand definitely on par with the far more expensive Schlage & Weiser units so I am going ahead and ordering 2 more for the other doors. Update : Bought 2 more and now have them on all 3 doors to my home & carport. All use the same code…….. no more fumbling for keys. No issues with cold…. rain or snow so far..Read more

    Helpful(0) Unhelpful(0)You have already voted this
  16. wayne p

    This lock works fine in summer and fall but freezes up often now the coldest part of a north western Ontario winter here. When it freezes you have to use the key. I don’t know if a name brand lock would also freeze. It was delivered on time and was an easy install. Other then the freezing issue it is a good lock set for the money.Read more

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    You may also like…

    Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel
    Kwikset 92640-001 Contemporary Electronic Keypad Single Cylinder Deadbolt with 1-Touch Motorized Locking, Satin Nickel

    $79.20

    Add address

    CartGet - Your Digital Corner Store
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart