Free Shipping on all orders! USE COUPON CODE NEW10 TO SAVE 10% OFF

Rapid Tac II Application Fluid for Vinyl Wraps Decals Stickers 32oz Sprayer 32 oz.

(9 customer reviews)

Formulated for specialty films and cold weather applications.
Makes vinyl installations faster and easier.
Aids in application without bubbles.
Allows for re-positioning of graphics.

Added to wishlistRemoved from wishlist 0
Add to compare
SKU: B006RUGPVU Category:

For fast, easy, quality installation of vinyl graphics with no bubbles. Rapid Tac II recommended for cold weather.

Change is good. Back in the day choosing a vinyl film was easy with basically two film types, cast, and calendared. Nowadays things are a little different. Sign and graphics professionals now hove more types of vinyl films to choose from than ever, with more adhesive types as well. Rapid Tac II was developed to work with a wider variety of films such as the economy calendared, intermediate calendared, high performance calendared, metallic, reflective, polyester, mylar and other specialty films). Rapid Tac II promotes bonding faster than the original Rapid Tac application fluid and is ideal for cold weather and glass application. Rapid Tac II is not a replacement for the Original Rapid Tac, and may bond too fast with “Premium Cast” films in warmer conditions.

STEP 1. Clean surface thoroughly with Rapid Tac II and a kitchen paper towel. DO NOT USE OTHER CLEANERS OR SOLVENTS. (We do recommend Rapid Prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants)

STEP 1. Clean surface thoroughly with Rapid Tac and a kitchen paper towel. DO NOT USE OTHER CLEANERS OR SOLVENTS. (We do recommend Rapid Prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants)

STEP 2. Spray surface again with Rapid Tac, peel backing off decal and place on wet surface.

STEP 3. Position decal and spray top of decal to minimize scratching. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions.

Specification: Rapid Tac II Application Fluid for Vinyl Wraps Decals Stickers 32oz Sprayer 32 oz.

Weight 1 lbs

9 reviews for Rapid Tac II Application Fluid for Vinyl Wraps Decals Stickers 32oz Sprayer 32 oz.

3.6 out of 5
5
1
0
0
3
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Eva Love

    This crap has no TAC at all! I honestly think I bought green water. Followed the instructions exactly, even had my hubby do it to double check me, he followed instructions and got the same result I did. This stuff is nothing more than colored water. I am returning it. Don’t waste your money here.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  2. Craakyerhead

    It says you can do full sun application on the bottle. Only issue is it dries before you can get the whole hood misted, but I blame the tiny nozzle on the 4oz bottle for that. This stuff might work great, but doing a full sun application with the tiny 4oz bottle was impossible. I ended up using water from my garden hose instead of this stuff. And yes, the vinyl hood wrap I did looks like crap.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  3. Carl S

    I was helping my brother install some vinyl badge and wheel overlays on his Ram and saw a video using this product. Well, it got me thinking about some Lux tail light tints I had bought about 3 months ago. I really struggled with those because they would stretch and warp a bit as I tried to install them and then they’d be nearly impossible to align right. So I had quit on that project but decided to try again with this in my arsenal. Ordered another set and using the slippery fluid made the alignment much easier and gave me time to properly align the pieces without any stretching out. Was very happy with the results. A little goes a long way so I should have bought the smaller container and saved a few bucks but all in all I’m happy with the product.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  4. RLEM1977

    First off, the product works. I used the RapidTac Prep first, then RapidTac II. Yes, it does allow one to position graphics then set them. However, it does not let you slide them around, you have to lift and re-position. It only is a problem with very large graphics. I have used this on race car graphics that were large and I “managed.” In the future I will most likely use Slide-On from Phoenix or Classic.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  5. Nena

    Awesome stuff.. don’t know and not care what it is. It works great with vivid pro carbon wrap and that is all that matter to me. The wrap was expensive, so don’t skimp and use “other” stuff. It’s been 3 months since the install and the van has been outside and the wrap still looks freaking awesome. I tend not to rate mediocre only really good a and really bad products. Nuff said.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  6. Robet Carr

    I used this to clean the surface of my Honda Passport door sills. Then applied generously to the surface and the back of the decals. I was done less than 3 minutes later. Following directions in how to move the fluid with a squeegee and I could not believe how fast what little air bubbles there were took to remove. Worth every penny. This is a professionals solution to applying vinyl decals.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  7. NV Dragon

    I was told by a sign shop in Las Vegas (where I bought a gallon of original Rapid Tac) that this stuff can be diluted as much as 10:1 – I will be diluting mine, as it can be rather slimy at full strength. This stuff is great for applying auto decals when the weather is cold. Not sure about this one, but the original Rapid Tac functions as a cleaner as well as application fluid.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  8. Big D

    For the first time ever I can do perfect graphics installs on my Dirt Bikes with no bubbles and no lifting edges. This stuff and a heat gun are your best friend for installing perfect graphics.Read more

    Helpful(0) Unhelpful(0)You have already voted this
  9. Giselle

    I found it worse than windexRead more

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    You may also like…

    Rapid Tac II Application Fluid for Vinyl Wraps Decals Stickers 32oz Sprayer 32 oz.
    Rapid Tac II Application Fluid for Vinyl Wraps Decals Stickers 32oz Sprayer 32 oz.

    Add address

    CartGet - Your Digital Corner Store
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart