TinFok Playstation 5 Skin is Printed with Super-High Resolution Graphics and Ultra High Gloss Finish. It Protects Your Devices from Scratching, Fading, and Peeling. Our Advanced Vinyl Guarantees a Perfect Installation Every Time.
This Skin Only For PS5 Disk Edition Consoles and Controllers.
– 1 PS5 Disk Edition Console Skin (Sticker)
– 2 PS5 Dualsense Controller Skin(Sticker) – Actual Controller Not Included.
For Best Results, Please Paste the Complete Uniform Use Hair Dryer Blowing Hot Air Above the Skin, Can Improve Skin Viscosity, It Won’T be Easy to Fall Off.
-1 Clean the Unit’s Surface as Thoroughly as Possible.Use Rubbing Alcohol On a Lint-Free Cloth to Remove any Grease or Other Contaminates. Most Issues of Non-Sticking are Due to Some Type of Oil or Grease That is on The Unit Prior to Installation.
-2 Peel One Piece of the Skin from the Paper Liner. Not to Let the Adhesive side Touch Anything.
-3 Determine the Placement, Apply the Skin(Sticker) to the Surface Using Your Fingers or the side of Your Thumb, Starting from One Corner and Working Your Way Across the Surface.
-4 If a Piece is Not Going On Straight, You Can Gently Lift It Back Up. Do Not Stretch It From Its Original Size.
-5 If Installed Slowly and Carefully, There Should be No Air Bubbles Left Under the Skin(Sticker). Any Air that May Become Trapped Under the Skin(Sticker) During Installation Will Go Away in Time.
Simply Peel Sticker Just Wipe The Surface With Alcohol. No Sticky Stuff Or Residue.