This is Convert a M.2 NGFF (SATA Channel) SSD into a standard 2.5 inch SATA Hard Disk Drive.B & M Key SATA Based NGFF SSD to SATA 3.0 Converter Card.
Compatible with Windows10/ 8/7/ IOS / Linux(Suit for both laptop and desktop).For wide compatibility with all of the common M.2 solid state drives, the M.2 to SATA III adapter supports multiple drive heights including: 2230, 2242, 2260, 2280MM.
The main body is ABS plastic, exquisite, light, plug and play. The shape of the mounting hole is exactly the same as the 2.5-inch notebook hard drive, which is a perfect replacement for the notebook mechanical hard drive, faster, shock-resistant, lower power consumption, and more stable。Input: 1 x NGFF B & M Key SATA Based (SATA Chanel) Female; Output: 1 x 2.5″ SATA 7+15pin Male.
Use the M.2 SSD to SATA adapter instead of a disk drive, without requiring any software drivers.Improve the compatibility of M.2 hard drives on PCs and laptops.File transfer speeds up to 6Gbps.Dimension:3.94 x 2.76 x 0.29inch.
Attention: PCI-E based B Key and any M Key M.2 SSD(e.g. NVME) are not supported.Before purchasing, please check whether your M.2 SSD is SATA channel or PCI-E channel on its brand website.If the hard drive has a password, cancel the hard drive password, otherwise other computers cannot recognize the hard drive.
Dennis Maeder –
This comes with no manual or instructions or heat sink. Important to know: It works with older SATA SSDs only, More modern NVMe SSDs WILL NOT WORK. There is no heatsink – just a plastic case screwed to the circuit board- heat dissipation is poor and components will overheat and you can burn yourself if you touch the back of the circuit board. The new item comes neatly wrapped, but with no instructions. The housing and circuit board are clipped together and must be pried apart to access a packet of tiny screws inside. The circuit board is keyed with just one notch, so it will accept any M.2 device, but will not work with NVMe – only SATA.Read more
The reason why I gave one star but everything else 5 star was for a very bad defect in the product. I noticed when I plugged it in, my computer didn’t recognize it. I thought maybe it wasn’t seating correctly in the pins. It got extremely hot to the point when I touched it, it made a burn mark on my pointer finger. I then tried my drive on another adapter I have and it was destroyed. Samsung 980 isn’t cheap and now it is garbage. Maybe it was the one I purchased as a defect. I do not know but the one I received wasn’t a blessing but a painful nightmare.Read more
Bear Hunter –
I felt the case after a couple days and it was very hot. I removed it and put it back in, and now it does not recognized the drive…any drive. 🙁 I put my drive in another of a different brand and it works find, and does not overheat. :-)Read more
Scott Halihan –
I ordered a set of two. One didn’t come with any screws. The nvme slot is backwards, so M keys are upside down. Also they put the embedded nut upside down (to hold the m.2 drive in place). When plugged into my PC, it is not recognized. This product sucks and I wouldn’t recommend it to my worst enemy.Read more
Matt Gingras –
Unlike other adapters which are just a bare circuit board, this enclosure and adapter combo is worth your time. Fits correctly anywhere a 2.5in hard drive would go.Read more
Ron Lewis –
Perfect fit and function.Read more
So, I bought one of this adapter and it did not work. Returned and exchange for another one but that did not work either…Therefore I just retuned and got my money back.Read more
Johanna A. –
Lo recomiendo. Funciona muy bien. Me siento satisfecho.Read more